BBGXV - ULTRA-HIDE SANDING SEALER-CLEAR, Y5035E

  • MSDS: BBGXV
  • Manufacturer: SCM COATINGS AND RESINS DIV
  • Product Name: ULTRA-HIDE SANDING SEALER-CLEAR, Y5035E
  • National Stock Number: 8010-00F000574
Product Identification

Product ID:ULTRA-HIDE SANDING SEALER-CLEAR, Y5035E
MSDS Date:01/01/1985
FSC:8010
NIIN:00F000574
MSDS Number: BBGXV

Responsible Party
SCM COATINGS AND RESINS DIVISION

Emergency Phone: 216/ 826-5566

Cage: 82053

Contractor
SCM COATINGS AND RESINS DIVISION

Cage: 82053

Ingredients

MINERAL SPIRITS EXEMPT (TLV VALUE SHOWN IS TYPICALLY

RTECS: SE7550000

Fraction By Weight: 27%

ACGIH TLV: 100PPM


(SEE SUPPLEMENTAL SECTION FOR ADDITIONAL INGREDIENTS).

Hazards

Effects of Overexposure:IRRITATION OF EYES, SKIN AND RESPIRATORY TRACT.
HEADACHE AND DIZZINESS LIKELY W/VAPOR INHALATION.

First Aid

First Aid:FUMES: MOVE PERSON TO WELL VENTILATED AREA. RESTORE
BREATHING. GET MEDICAL ATTENTION. SKIN: WIPE WITH CLEAN CLOTH, WASH
THOROUGHLY WITH SOAP AND WATER. EYES: FLUSH THOROUGHLY WITH WATER,
GET MEDICAL A TTENTION.

Fire Fighting

Flash Point:50F, T.C.C.
Lower Limits:0.9
Extinguishing Media:CO2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER SPRAY MAY BE USED TO COOL CLOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT OR FIRE. DO NOT APPLY TO HOT SURFACES.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREA. MOP SPILLS WITH INERT ABSORBENT.

Handling

Handling and Storage Precautions:STORE BELOW 100 DEGREES F. KEEP
CONTAINERS CLOSED AND AWAY FROM HEAT AND OPEN FLAME.
Other Precautions:AVOID PROLONGED CONTACT WITH SKIN AND BREATHING
VAPORS OR SPRAY MIST. DO NOT TAKE INTERNALLY. AVOID CONTAMINATION
WITH FOREI MATERIALS.

Exposure Controls

Respiratory Protection:USE MASK, MECHANICAL FILTER/ MASK, CHEMICAL
MECHANICAL FILTER TYPE
Ventilation:DILUTION VENTILATION OR LOCAL EXHAUST
Protective Gloves:SOLVENT RESISTN
Eye Protection:SPLASH-PROOF GOGGLES
Other Protective Equipment:IN CONFINED AREAS USE AIR LINE RESPIRATOR OR
HOODS.
Supplemental Safety and Health
ALSO CONTAINS 37% SUPER VM&P NAPHTHA, TLV-300PPM.

Chemical Properties

Boiling Pt:B.P. Text:240-374F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:71

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Hazardous Decomposition Products:CO, CO2 AND POSSISBLE NO FUMES ON
IGNITION

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.